There’s no doubt Lifetime commands shed respect in the USA inspired through vast sales complemented with sparkling feedback. Exhibiting a desert-sand facade enhanced with greyish brown doors and trim, Lifetime sheds provide an unblemished yet stylish appearance, destined to intensify modish tones to any garden scenery.
If you’re scouring the market looking for an 8×8 Resin Storage Shed to store your outdoor gear, determined in securing a hassle free future where maintenance is concerned, take an inspection of Lifetime’s 8 x 7.5 ft shed.
Moving down the low maintenance avenue, determined in finding an alternative replacement to resolve weather-decaying issues we purchased a robust resin material as opposed to wood. Getting shut of upkeep duties was a great decision on our behalf yet we’ve found this weatherproof material provides plenty of advantages contrary to their wooden and metal counterparts.
If an expeditious wash-down turning muck to shine in an instant floats your boat in accordance with an 8 x 7.5 footprint to accommodate location & services, read on to consider ditching those future re-roofing and re-varnishing headaches.
Lifetime 8 x 7.5 ft
Lifetime have purposely built this range to be extendable. Sheds within Lifetime’s 8 ft width group have the same frontage dimensions across the doors, only their depths vary, stretching out in 2.5 ft extensions across the range.
These 8 x 7½ feet proportions are sandwiched between the smaller 8 x 5 utility and the more spacious 8 x 10 ft dimensions.
Shed Ranges: Explore this website’s reviews across various sizes and ranges of resin garden sheds boasting weather-resistance.
Model: 6411 / 60015
Size: 8 ft x 7.5 ft
More Info: Lifetime Products
Verdict: Very Popular
#Feature: Low Maintenance
Chunky & Durable Facade Composition
An immaculate appearance exhibited through Lifetimes’s desert-sand tinge freshens a garden’s landscape with stylistic modern flair.
Escaping the flimsy make-up of a single walled structure, rigidity comes into fruition by the manufacture of a sturdy double skinned formation with an inner-ribbed construction enhancing robustness, built to withstand the unsightly appearance of dents and chips.
Composed through a process termed High Density Polyethylene (HDPE) the dual skinned interlinking panels firmly connect to the steel framing structure meanwhile simultaneously interlocking with the floor, enclosing the shed from the outside environment.
The exterior panels fit flush, molded to resemble horizontal wood panelling encompassing an attractive grain textured surface running through the desert-sand shade whilst internally a heavy duty steel reinforced infrastructure fortifies overall stability to their construction.
Our wishes were to depart the never-ending yearly varnishing duties wood demands for preservation. In contrast, polyethylene’s decay resistant manufacture puts an end to conservation, living up to those low maintenance dreams notwithstanding the blessings of supplementary UV protection preventing plastic’s inherent colour fade and splitting issues when exposed to sunburn attack.
Lifetime sheds are virtually maintenance-free, an easygoing express wash leisurely returns assembly-day’s mint condition. A shower connector fitted to the garden hose suffices for us, most champion the pressure-wash method to replenish the shine. Awkward to shift stubborn marks that lodge within the grain can soon be gotten rid of using non-abrasive cleaners, warm water and a light scrub.
This particular facility includes one window with installation options to either of the 7½ ft lengths, position-able to suit & serve a wide variety of garden locations.
Explore the Features
Aslant Roof Design for Draining Efficacy
Lifetime adhere to the majorities preference regarding a roof structure, relating to an apex design with a decent angled peak to ensure instantaneous rainwater drainage.
The roof is manufactured from polyethylene resin, molded into double skinned sheet formation displaying a stylish semblance of slate tiling, structurally secured by a steel framework whilst additionally fortifying the entire topping regards 2 A-frame steel trusses stretching across the apex inside delivering enhanced structural support for heavy snow-loads.
All the steel supports reinforcing the structure including the A-frame beams are powder-coated for rust-prevention, uniting with the polyethylene ensures the delivery of a near maintenance-free shed.
The high angled apex peak generates a copious amount of internal headroom resulting in functional light & airy inner proportions, able to walk around with ease inclusive of plentiful daylight vision derived from two large illuminating impact resistant skylights embedded within the roof.
Where the high peaked roof adjoins the facade, eaves are created by the generous overlap delivering twofold advantages, a steep angle averts puddles & produces swift drainage whilst the roof extension overcomes leakage issues due to the walls underneath abutment.
Polyethylene manufactures are not susceptible to decay, putting an end to repeatable re-roofing projects, furthermore Lifetime’s well supported structural design determines peace of mind to survive lumpy snowfall winters.
The Merits of Integrating a Floor
Before making our decision to purchase a plastic construction, the metal brand were on the list but they seldom have floors built-in. Determined to escape the future implications of rot, a problem associated with rainwater gaining entry at the base of the shed and puddling the internal floor, a move into the enclosed resin style ticked our boxes.
Delighted with this built-in advantage, around Autumn time’s a delight. The environment inside maintains leaf-free due to the non admittance of debris sweeping in thanks to the elimination of gaps present at the boundary edge, a debris-free interior certainly preserves storage.
The base area regards a polyethylene makeup, molded into a hefty anti-slip thickset grounding resistant to oil and solvent spillages, the stain-free composition only requires a quick wipe up when anything’s spilled. The resin sheets jointly interlink producing the base meanwhile around the perimeter rim an interlocking procedure connects the walls & blocks the gap delivering encasement.
Lifetime’s floors are purposely designed hard-wearing. Supplementary toughening elements blend within the polyethylene mix delivering enhanced strength to endure the pressures associated with heavyweight storage and riding-in weighty machinery suchlike lawnmowers & mobility scooters.
Having the stamina to survive the tensions however will only fulfil their manufactured intentions if stationed on solid level footings such as wood, concrete asphalt or paving to name a few. Adhering with this rule provides longevity for challenging use.
For protection against wild weather, stability-resistance to gusts is elevated multiple times by firm anchorage, simply by virtue of screwing the base down onto the solid material below.
Pleasant Spacious Interior
Inside, an airy environment transpires where an adult can comfortably stroll around without receiving a headache through cracking your nut thanks to the steep aslant roof-design delivering a generous 2 meters of centred internal height from the truss system down to the floor plus additional height above the trusses towards the apex peak.
There’s the choice of placing the window on either side to suit garden surroundings. The window regards an anti-smash poly-carbonate manufacture that can be opened half way for additional ventilation.
Couple the window with the addition of 2 large or 3 smaller (dependent on model) impact resistant skylights embedded within the roof, a daylight atmosphere illumines internally escaping any claustrophobic or hemmed in feeling.
Although shelving accessories do vary dependent on model, this shed pictured below includes 2 front corner shelves, 3 rear shelves and 2 peg-strips with metal hooks for suspending long tools adjacent to the resin walls. Due to the inability to screw into plastic to add more shelving, we decided to install free-standing shelves of the tiered variety and large resin stacking boxes to further increase storage options towards the ceiling.
Notice the air vents in the image below above the doors, these eliminate a sweaty atmosphere developing, the inherent clamminess plastic sheds were once associated with during humidity. Ventilators situated front and back generate a free-flow of fresh-air current to circulate around inside, a simple but smart feature that further increases storage preservation qualities.
Substantial Access Delivered
Lifetime doors deliver decent access height through their high arch design preventing a crouched over feeling during entry. Double door access was paramount for our shed decision enabling a quick garden tidy-up, even storing the patio tables and chairs is simplified when access like this is made effortless.
The doors constitute the facade’s durable polyethylene manufacture albeit shaded brown ensuring weatherproof defence without succumbing to decay, furthermore reinforced with a textured metal infrastructure provides increased security advantages whilst increasing their robustness.
Galvanised steel hinges incorporate the door’s entire length providing operational sturdiness when opening and closing. Once the roof is assembled, stability for the doors functional swing is accomplished.
The door latching consists of an integral spring mechanism, press the top of the door handle and the metal latch operates the entry-apparatus, opening the doors. Upon closure, two metal clasps join both doors together to facilitate the use of padlock security.
Beneficial for windy weather, maintaining the left facing door’s closed position whilst the right door provides the entryway regards two dead bolts situated internally at the top and bottom of the left hand door, their operation delivers the doorstop – Great feature.
Measurements of Lifetime’s 8 x 7.5 ft Shed
Uncomplicated Assembly Process
The one-step approach in accomplishing a flawless resin shed construction regards establishing the creation of solid level foundations for the footings. Concrete or wood laid perfectly level, elevated slightly above ground level to prevent the floor immersed in flood water provide ideal foundations.
We listened to this advice and complied by constructing the required foundations, they serve the purpose for the following reasons:
- A level base simplifies the alignment of the facade panels. If you are not level on the base, aligning these sheets 8 ft up on the roof represents difficulties.
- Lining up the doors from a level base delivers a plumb fitment, ensuring the correct opening and closure swing.
- Level footings create a vertical stance safeguarding the shed from leaning pressures, ensuring the roof weight attributes equal force to all four sides.
- Laid on solid flat ground increases the floor’s survival rate in sustaining hefty endurance strains.
- Once the shed’s construction is finalised, it’s recommended to attain firm anchorage, hence the requirement of solid footings.
We took all these tips on-board from previous assemblers and the manufacturers guidelines, resulting in a very straightforward assembly.
Reading through the instructions prior to commencing we placed all the parts in order of the assembly-steps to simplify the process. Using a low-torque power screwdriver certainly speeds things up due to the inevitable mountain of screws.
Take a look at the video’s installation procedure below, a thorough overview of how straightforward assembly is.
Lifetime Shed installation service is now offered in the UK
Construction made Simple
Strengths and Weaknesses
- Modish & stylish architecture complements any garden settings
- Medium-size, able to accommodate a whole host of storage
- Maintenance solely regards a swift wash
- Resistant to corrosion & decay
- Steep angled apex renders effective rainwater drainage
- Generous internal height
- Built-in floor retains clean internal surroundings
- Integrated floor provides toughened support
- Light and airy internal environment
- Windows and roof-lights illumine daylight
- Air vents circulate freshness inside
- Double door access simplifies entry
- Pad-lockable door security
- Assembly necessitates two people
- Robust steel reinforced construction
- Part of USA’s best selling Lifetime range
- 10 years limited manufacturers warranty
- Super-easy surface to clean
- Imperative the correct foundations are in situ
- Incapable for mounting additional shelves into resin – Consider free-standing
- Refrain from over-tightening the screws
- Anchor the base down
8 x 7½ ft Resin Shed Rivalry
Competition is building year on year with many opting for the low-maintenance advantages these manufactures provide.
Shed Sizes steps the dimension up in an orderly fashion of every reviewed weatherproof shed. Here’s a selection chosen from this page:
Tremont’s picturesque exhibit
Factor’s cheaper quality alternative
Fusion’s wood ‘n’ resin composition
Oakland’s alluring rustic presence
Lifetime’s unblemished appearance
This 8 x 7½ ft model is part of the biggest selling range of sheds in America. Reviews speak volumes, the reason it maintains its popularity.
If low maintenance fits the bill for the future and this size accommodates the intended location, it’s worth serious consideration. There’s a lot of competition regarding this size, some good ones at that including a few sublime new entrants. Alike the competition, Lifetime sheds are inclusive of 10 years limited warranty cover.
Capped off with a high-pitched apex effectuates instant drainage, a fresh light ambience is generated through the window, skylights & air-vents, double doors enable easy storage access whilst the built-in floor survives challenging pressures. Merge these advantages with the modish appearance, weather-resistant manufacture, robust structure and low maintenance wash-down benefits, the huge draw becomes obvious.
It’s one popular shed.
It’s been a pleasure writing this article, thanks for inspecting.
If you’ve any 8 x 8 resin storage shed favourites or queries, please share in the comment box down-under.
Please socially share. Thank you!
this shed looks great, I have just bought a house and I am looking for a shed. Do you deliver to Australia? If yes, I would be interested in the price of delivery as well. I really like the design of the shed, at the moment I have 2 and I would like to have just one where I can fit everything. I look forward to hearing from you
Thanks for dropping by to read about Lifetime’s take on an 8×8 resin storage shed spanning 8 feet by 7.5 feet.
This size represents one of the most popular garden shed measurements purchased due to fitting a decent amount of storage items along with the dimensional advantage of locating in most home-yard plots.
You’ll be able to organise the home extremely efficiently moving all your outdoor gear into a shed this size plus the stylish architecture exhibiting neutral desert-sand tones accentuates sublimely with landscapes.
The only two countries we concentrate on pointing visitors towards with respect of prices regards the USA & UK but many sellers nowadays offer international free shipping. I would ask the sellers whether they ship to your home address in Australia. Failing that type ‘Lifetime 8 x 7.5 shed’ into Google to check whether there is a distributor locally.
Good luck purchasing Marta and thanks again,
I love this shed! I need a smaller shed to keep my essentials and frequently used items. My lawn mower, gas and some tools, among other things. My larger shed is inconvenient to my house; but convenient to my garden.
I am really into resin sheds; because I don’t like the upkeep of the wood sheds. I think you described the construction in detail, and it looks very durable. I love the shelves and the garden tool hanger. I also like that it has sky lights and windows. And I like that it comes with a floor. My house is white, though, so the coloring doesn’t really match. It is attractive however.
What kind of base floor do you recommend and how do I anchor it down?
What is the price of this shed in the USA? I wasn’t able to find out when I went in to pricing.
Thanks for a great review.
Thanks for dropping by and reading about Lifetime’s 8×8 resin storage shed.
Yeah, we find this shed size such a convenient service for harbouring the gardening equipment, patio furniture and outdoor gear.
We too were fed up with the upkeep hassles our last wooden facility demanded year on year and made the switch into the plastic world, they’re so easy to maintain. The swift wash down once in a while with a light spray-hose works wonders replenishing the shine.
Lifetime sheds display a desert-sand shade, if this isn’t to your liking take a look at the competition of low maintenance resin sheds here, there’s some very stylish designs entering onto the market recently:
As far as bases go, wood or concrete is ideal, making sure its perfectly level as described in the Assembly section. If you decided on a larger model concrete would be my preferred choice due to the more weight the shed will be carrying and driving in on a sit-on-mower etc.
The prices in the USA today are $911.47. The first link below the image takes you to the USA prices:
Thanks again Jeannie, hope this helps and good luck with your decision,
What a nice, clean and sleek looking Shed this is. I have been looking around at local home improvement places and this one you are showcasing is the best I have yet to see. The dimensions and the look are exactly what is appealing to me. The shed we have in our yard is on its last legs and has leaks and really isn’t doing what it should be. I may just have to take the plunge a purchase one.
Thanks for this!
Thanks for calling in and leaving a comment.
Lifetime sheds are a clean looking design, I agree. These are manufactured from a low maintenance polyethylene resin facade colored with a beige shade whilst topped off with single style roof panels destined to compliment any surroundings.
I always place the dimensions in a post as it’s the internal measurements that visitors want to check against their storage to find out whether it will serve their storage requirements.
Your shed sounds like our last wooden shed that succumbed to rotting away albeit we re-varnished it every year to try and preserve but to na avail in the end. We decided to switch to a quality plastic shed design.
Hope I have provided some inspiration. Good luck with your decision Steve,
The one point on the drawback is considering metal in case there is a fire occurrence. This means the HDPP materials couldn’t withstand fire, no? I think that’s the ambiguity I have. Anyways, it’s worth getting it as there is not much work of ‘Do It Yourself’ in terms of cleaning and tools replacement such as metallic nuts being loosen.
Thanks for your interest in this Lifetime shed.
Where fire is concerned, in my view there’s a limit to what anything plastic will stand up to before the melting process takes place however due to metal sheds not having a built-in floor does that mean the fire will simply spread underneath, ruin all your storage leaving a burnt out shell standing there – I think so.
Always make sure you prepare a solid level base for the shed to sit on and this will result in an easy assembly where all the panels line up correctly to secure the shed.
Once built there’s very little maintenance required, only a wash down every now and again to bring the shed back to the pristine condition it was the day assembly took place.
Thanks again Tar and good luck with your decision,